Steps to Hard Drive Diagnostics :Seatools Diagnostics Disk to Check for Hard Drive Failure

If your computer won’t boot any longer, maybe the “Drive Failure Eminent” or “Disk Read Error” has been bothering you for a couple of power ups before this moment. Chances are, you have a hard drive failure. However, how do you know for sure? If you take your computer to a repair shop, chances are, you will pay hundreds of dollars just to find out that all your data is lost and you will have to get a new hard drive. How will you prevent that from happening? With the hard drive diagnostic by Seatools, it is easy to use a program which you can download and burn to a blank disk, play in the CD drive, boot off and scan your computer’s drive for any failures. It might not recover all your data; however, it will save you the money for diagnostics at a repair shop, and then you could just replace the drive itself.

How to acquire hard drive diagnostic by Seatools

Step 1

Your computer must have access to the Internet and go to the website of Seatools. http://www.seagate.com/www/en-us/support/downloads/seatools

Step 2

Under the Seatools DOS heading, download the .ISO file for hard drive diagnostic.

Step 3

Use a particular software that can burn the .ISO image of hard drive diagnostic to the blank disk (there is a lot out there to select from, your CD-ROM drive or computer likely came with some for free).

Using the Hard Drive Diagnostic by Seatools to Look for Errors

Step 1

Boot up your dying PC and place in the blank disk at the CD-ROM drive.

Step 2

You could choose the entire test to run (usually this is a good idea because it tests all the other occupations of the computer, such your computer’s memory, just in case this is the real issue). However, make sure that the Full Drive Scan option is selected and then press next.

Step 3

Wait for a while; the tests will take a couple of minutes, especially when performing the Full Drive Scan. Be patient and wait for the results.

Step 4

Sometimes the process takes hours so you can do other things, but don’t forget to check and see if the scans come back with errors.

Step 5

If the drive shows multiple bad sectors, this means that the hard drive of your computer is either dying or is already too far gone. If you can still boot from the drive, back up your data as fast as possible. If the drive shows file system errors, you must either hook the drive up as a secondary drive or run check disk to repair the errors and back the data up. Well, this is not possible in some cases, but you could likely format the hard drive and still make use of it even if you lose all of the data. If you manage to get any other kind of errors, such as an interface error (with IDE or SATA) or a memory error, then the drive may not be bad, but the system board or its components could be and you should send the computer to a repair shop or pop the drive into another computer.

Hard Drive Diagnostic by Seatools for Windows has replaced the PowerMax and SeaTools Online. Hard Drive Diagnostic SeaTools for Windows is an easy-to-use, comprehensive diagnostic tool that will help you quickly determine the disc drive condition in your notebook, desktop or external hard drive computer. It includes several tests that will examine the physical media on your Seagate or Maxtor disc drive and any other non-Seagate disc drive.